Fill Time & Water Cost Calculator

How long filling or topping up takes with your hose, and what the water costs.

What are you doing?
Pool volume (work it out)
Hose flow
Water rate (from your bill)

Bucket test: turn the hose fully on and time how many seconds it takes to fill a bucket of known size.

Fill time and cost

Fill in the boxes and your answer appears here.

How to use it

  1. Choose a full fill or a top-up. For a top-up, enter the surface area and how many inches you need.
  2. Time your hose with a bucket. This one step makes the answer far more accurate than any average.
  3. Enter the water rate from your bill, plus the sewer rate if your utility charges it on all water.
  4. If you are thinking about a water truck, enter the load size and price from a local quote to compare.

Why hose flow varies so much

A garden hose can deliver anything from 2 to 17 gallons a minute. Water pressure, the size of the supply pipe, the hose diameter and length, and other taps running in the house all change it. A long 1/2-inch hose on a low-pressure street might fill a pool at a third of the speed of a short 3/4-inch hose on good pressure. That is the difference between a one-day fill and a three-day fill.

Worked example

Filling 18,000 gallons. A 5-gallon bucket fills in 32 seconds. Water costs $5.20 per CCF and sewer $4.10 per CCF.

Flow = 5 × 60 ÷ 32 = 9.4 GPM. Time = 18,000 ÷ 9.4 = 1,920 minutes, about 32 hours. A CCF is 748 gallons, so water and sewer together come to (5.20 + 4.10) ÷ 0.748 = $12.43 per 1,000 gallons, or about $224. A sewer credit would save about $99 of that.

Topping up 3 inches on 600 sq ft: 600 × 3 × 0.623 = 1,122 gallons, about 2 hours at 9.4 GPM.

How it's calculated

Time = gallons ÷ gallons per minute. Bucket flow = bucket gallons × 60 ÷ seconds. Top-up gallons = surface area × inches × 0.623, because a 1-inch layer over one square foot holds 0.623 gallons. Cost = gallons ÷ 1,000 × (water + sewer rate per 1,000 gallons); rates per CCF are divided by 0.748. More on How we calculate.

Questions people ask

How long does it take to fill a pool with a garden hose?

For an average hose at about 9 gallons a minute, roughly 1 hour 50 minutes per 1,000 gallons. A 15,000-gallon pool takes about 28 hours. Time your own hose with a bucket for a real figure.

How much does it cost to fill a pool?

Gallons ÷ 1,000 × your water rate per 1,000 gallons, plus sewer charges if your utility bills sewer on all water. At a combined $10 per 1,000 gallons, 15,000 gallons costs about $150.

Is it cheaper to fill a pool with a water truck?

Usually not per gallon, but it is much faster, and it avoids sewer charges and slow wells. Compare a local quote using the truck fields in the calculator.

Can I use two hoses to fill my pool faster?

Yes, if they are on separate spigots and your pressure holds. Do the bucket test with both running to see the real combined flow.

Estimates only. Product strengths vary from jug to jug and lose strength with age, so treat every amount here as a starting point. Follow the product label, add in stages, and retest before swimming. For stubborn algae, equipment faults or surface damage, call a pool professional. Full disclaimer.

Embed this calculator

Pool service companies and bloggers are welcome to put this calculator on their own site. Copy the code below. Please keep the credit line under it.

My Pool

Saved in this browser only. Nothing is sent to us. Every calculator fills itself in from here.