Green Pool Recovery Planner

Pick how green it is and get a day-by-day plan: chlorine level, amounts of your product, and the test that tells you it's finished.

How green is it?
Pool volume (work it out)
Finished? Overnight test (optional)

Your green pool plan

Fill in the boxes and your answer appears here.

How to use it

  1. Pick the picture closest to your pool, looking down from the edge in daylight.
  2. Enter your volume and stabilizer (CYA). Stabilizer sets the chlorine level the whole job runs at. If the water is too murky to read a test, a pool store can test a sample.
  3. Choose the chlorine you will use. Liquid chlorine or plain bleach is best for this.
  4. Follow the plan day by day. When you think it is finished, do the overnight test and enter both readings.

Why one big shock rarely works

Algae uses up chlorine as it dies. A single bag of shock spikes the chlorine for a few hours, the algae eats through it, and by the next afternoon the level has fallen to where the survivors grow back. That is why so many green pools go green again a week later.

What works is holding a high chlorine level, without gaps, until the algae is completely gone. The level depends on your stabilizer: about 40% of the CYA reading, and never less than 10 ppm. You test several times a day and top up each time it drops, brush daily, and keep the filter clean and running around the clock. The plan above turns that into amounts for your pool and product.

Worked example

A 15,000-gallon pool, dark green, stabilizer 50 ppm, chlorine 0, 10% liquid chlorine.

The target is 40% of 50 = 20 ppm. Raising 15,000 gallons (56,780 liters) by 20 ppm takes 1,136 g of chlorine. Fresh 10% liquid chlorine carries about 110 g per liter, so the first dose is about 10.3 liters: 2.7 gallons. Each 1 ppm top-up after that is about 17 fl oz. On the first full day it is normal to add 5 to 10 ppm in top-ups; by the last day it may be 1 or 2.

How it's calculated

The shock level is 40% of stabilizer with a 10 ppm floor, the level widely used in residential pool care and consistent with the research on how stabilizer weakens chlorine. Doses use your product's real chlorine content, the same math as our shock calculator. The finish line is three tests passed together: clear water, combined chlorine 0.5 ppm or less, and an overnight chlorine loss of 1 ppm or less, which shows nothing in the water is still using up chlorine. Typical durations come from pool service guides and are shown as ranges, not promises. More on How we calculate.

Common mistakes

Using stabilized shock. Dichlor bags add stabilizer with every dose, which raises the target as you go. Use unstabilized chlorine.

Letting the level drop overnight. The most important test of the day is the one before bed.

Stopping when it looks clear. Clear water can still hold enough algae to bloom again in days. Finish with the overnight test.

Skipping the filter. Dead algae clogs filters fast. A filter that isn't cleaned stops filtering, and the water stays cloudy even though the algae is dead.

Questions people ask

How long does it take to clear a green pool?

Light green pools often clear in 1 to 3 days. Dark green takes about 4 to 7 days, and a swamp can take two weeks. A clean, constantly running filter and holding the chlorine level without gaps make the biggest difference.

How much shock do I need for a green pool?

Enough to raise free chlorine to 40% of your stabilizer reading, at least 10 ppm, and then enough to hold it there for days. For a 15,000-gallon pool at 40 ppm stabilizer that is about 2.2 gallons of 10% liquid chlorine to start, with top-ups after.

Why is my pool still cloudy after shocking?

Dead algae and debris cloud the water until the filter removes them. Keep the pump running, clean the filter whenever its pressure rises, and vacuum what settles. If chlorine keeps dropping fast, the algae isn't dead yet.

Should I use algaecide on a green pool?

Chlorine held at the right level kills algae on its own. Some algaecides help prevent regrowth afterwards, but copper-based ones can stain plaster. Read the label, and never mix algaecide with chlorine in a bucket.

Can I swim in a green pool?

No. Algae can hide drains and steps, and the water may carry germs. Wait until it is clear, the overnight test passes and chlorine has come back down to the level your product label allows.

Estimates only. Product strengths vary from jug to jug and lose strength with age, so treat every amount here as a starting point. Follow the product label, add in stages, and retest before swimming. For stubborn algae, equipment faults or surface damage, call a pool professional. Full disclaimer.

Embed this calculator

Pool service companies and bloggers are welcome to put this calculator on their own site. Copy the code below. Please keep the credit line under it.

My Pool

Saved in this browser only. Nothing is sent to us. Every calculator fills itself in from here.