How to use it
- Pick what the water looks like and tick anything that happened recently.
- Add your filter type and how long the pump runs each day.
- Enter any test results you have. Free chlorine and stabilizer matter most; pH, alkalinity and calcium let the tool check for scaling.
- Work through the causes from the top. Most cloudy pools have one main cause and one helper.
The three groups of causes
Sanitizer. Chlorine too low for the stabilizer level lets bacteria and early algae multiply before anything shows green. This is the most common cause, and the one most often missed, because a reading of 2 or 3 ppm looks fine on a test strip even when stabilizer is high enough to make it too weak.
Balance. When pH, alkalinity and calcium are all on the high side, calcium carbonate comes out of the water as a fine white haze. The saturation index puts a number on it: above about +0.3, expect cloudiness and scale.
Filtration. A clogged or undersized filter, or a pump that only runs a few hours a day, leaves fine particles in the water. Chemistry can be perfect and the water still looks dull.
Worked example
Milky water two days after a party; free chlorine 1.5, stabilizer 60, pH 7.9, alkalinity 130, calcium 450; sand filter, pump 6 hours a day.
Three things stack up. Chlorine of 1.5 ppm is under the 4.5 ppm minimum for 60 ppm stabilizer. The saturation index is about +0.7, so calcium is clouding the water. And six hours of filtering isn't enough after a heavy swim day. The fix: lower pH to 7.3, shock to 24 ppm and hold it, and run the pump around the clock until it clears.
About clarifiers and flocculants
A clarifier makes fine particles clump into bigger ones the filter can catch. A flocculant goes further and sinks everything to the floor overnight, to be vacuumed out on the waste setting. Both are tools for after the cause is fixed. Used on a pool with low chlorine, they clear the water for a few days before the cloudiness comes back. Flocculant only suits filters with a waste setting: sand and DE.
The likely causes come from standard pool service troubleshooting. Chlorine and scaling checks use the same chemistry as our other calculators; see How we calculate.
Questions people ask
How do I clear a cloudy pool fast?
Clean the filter, brush, run the pump 24 hours a day, and fix chlorine and pH. Most pools clear within 1 to 3 days once the cause is fixed. A clarifier speeds up the last stage.
Why is my pool cloudy after shocking?
Shock kills algae and bacteria, and their remains cloud the water until the filter removes them. Cal hypo shock can also cloud water with high pH or calcium. Keep the pump running and clean the filter when its pressure rises.
Can high pH make a pool cloudy?
Yes. High pH, especially with high alkalinity and calcium, makes calcium carbonate drop out as a white haze. Lowering pH to 7.2–7.4 usually clears it through the filter in a day or two.
Is it safe to swim in a cloudy pool?
No. If you can't see the main drain clearly, a swimmer in trouble may not be seen either. Cloudiness also often means the chlorine is too low to keep the water safe.
Estimates only. Product strengths vary from jug to jug and lose strength with age, so treat every amount here as a starting point. Follow the product label, add in stages, and retest before swimming. For stubborn algae, equipment faults or surface damage, call a pool professional. Full disclaimer.