Pool Chemistry Chart
Ideal levels for every reading, what it means when one is off, and what fixes it. Print it and keep it with your test kit.
Ideal levels and fixes
| Reading | Aim for | Too low means | Raise with | Too high means | Lower with |
|---|---|---|---|---|---|
| Free chlorine | 7.5–10% of your CYA reading (salt pools 5–7.5%), never under 1 ppm | Algae, cloudy water, germs survive | Liquid chlorine, bleach, cal hypo | Bleached liners and swimsuits, irritation | Time and sunlight; nothing to add |
| Combined chlorine | 0–0.5 ppm | — | — | Chlorine smell, red eyes | Shock: raise free chlorine |
| pH | 7.4–7.6 | Stinging eyes, etched plaster, corroded metal | Soda ash; aeration | Scale, cloudy water, slower chlorine | Muriatic acid or dry acid |
| Total alkalinity | 80–100 ppm (salt 70–100, tablets 100–120) | pH swings, etching | Baking soda | pH keeps rising, scale | Acid plus aeration, in rounds |
| Calcium hardness | 200–400 ppm plaster; 150–300 vinyl and fiberglass | Etched plaster and grout | Calcium chloride | Scale, cloudy water | Replace part of the water |
| Stabilizer (CYA) | 30–50 ppm (salt pools 60–80) | Chlorine burns off in sun | Cyanuric acid (stabilizer) | Chlorine works too slowly | Replace part of the water |
| Salt | Per your generator, usually 2,700–3,400 ppm | Generator stops making chlorine | Pool salt | Generator error, corrosion risk | Replace part of the water |
| Saturation index (LSI) | −0.3 to +0.3 | Water etches surfaces and metal | Raise pH, alkalinity or calcium | Scale and cloudiness | Lower pH, then alkalinity |
Free chlorine for your stabilizer level
Chlorine's strength depends on how much stabilizer is in the water, so the chlorine number to aim for moves with your CYA reading.
| CYA | 0 | 30 | 40 | 50 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|---|
| Hand-dosed pool: min / aim | 1 / 3 | 2.5 / 3.5 | 3 / 4 | 4 / 5 | 4.5 / 6 | 5.5 / 7 | 6 / 8 |
| Salt water pool: min / aim | 1 / 3 | 1.5 / 2.5 | 2 / 3 | 2.5 / 4 | 3 / 4.5 | 3.5 / 5.5 | 4 / 6 |
| Algae shock level | 10 | 12 | 16 | 20 | 24 | 28 | 32 |
Hot tubs
| Reading | Aim for |
|---|---|
| Free chlorine | 3–5 ppm |
| Bromine | 4–6 ppm |
| pH | 7.4–7.6 |
| Total alkalinity | 80–120 ppm |
| Calcium hardness | 150–250 ppm |
| Stabilizer | Under 40 ppm (chlorine tubs only) |
Order of adjustments
- Replace water first if stabilizer, calcium or salt is far too high.
- Total alkalinity.
- pH.
- Chlorine, at least 30 minutes after any acid.
- Calcium.
- Stabilizer and salt.
For amounts in your own pool, enter your results in the pool chemical calculator.
Reading test strips accurately
Test strips are quick but easy to misread. Most errors come from how the strip is handled rather than the strip itself.
- Take water from elbow depth, away from return jets and the skimmer.
- Dip for the time on the bottle, usually a second or two, then hold the strip flat. Tilting it lets colors run between pads.
- Read each pad at the time stated on the bottle, in shade but in daylight. Colors keep changing after that.
- When a pad falls between two colors, take the middle value. Strips read in big steps, so a "between" reading is normal.
- Keep the bottle closed and out of the heat; moisture ruins strips within weeks. Check the expiry date.
- Very high chlorine (over about 10 ppm) bleaches the pH pad and gives a false high reading.
For chlorine, stabilizer and alkalinity, a drop-test kit gives finer steps and is worth having for anything beyond a quick check.
How often to test
| Reading | In season |
|---|---|
| Free chlorine and pH | 2–3 times a week; daily in hot weather or heavy use |
| Total alkalinity | Weekly |
| Stabilizer, calcium, salt | Every 2–4 weeks, and after heavy rain or a refill |
| Hot tub chlorine or bromine and pH | Before each use |
Ranges come from the US pool and spa water quality standard, public health codes and published chlorine–stabilizer research. Sources are listed on How we calculate. Always follow your product labels.